This is the All-in-one F4 FC by Matek, combing a F405 FC and PDB together, built-in Baro sensor, BetaFlight OSD, BEC 5V/2A, SD card slot for Blackbox and current sensor.
FC Specifications
- Target : MATEKF405
- MCU : 168MHz STM32F405
- IMU : MPU6000 accelerometer/gyro (SPI)
- Baro : BMP280 (I2C)
- OSD : BetaFlight OSD w/ AT7456E chip
- Blackbox : MicroSD card slot (SD/SDHC)
- VCP, UART1, UART2, UART3, UART4, UART5
- Built in inverter for SBUS input (UART2-RX)
- PPM/UART Shared : UART2-RX
- SoftSerial on TX2, S5 or S6 optional
- Camera control on S6 or DAC optional
- Smartaudio & Tramp VTX protocol supported
- WS2812 Led Strip : Yes
- Beeper : Yes
- RSSI : Yes
* If Gyro 32kHz & PID loop 16kHz, Blackbox logging rate 1kHz Max.
PDB Specifications
- Input : 9~27V (3~6S LiPo) w/TVS protection
- PDB : 4x30A (Max.4x50A), 6 layers*2oz copper PCB
- BEC : 5V/2A (Max. 3A)
- LDO 3.3V : Max.300mA for Spektrum RX
- Current Sensor 200A (Scale 165)
- Battery Voltage Sensor : 1:10 (Scale 110)
General Specifications
- 3x LEDs for FC STATUS (Blue, Red) and 3.3V indicator(Red)
- 6x PWM / DShot outputs without conflict
- 5x UARTs
- 1x Group of G/S1/S2/S3/S4 pads for 4in1 ESC Signal/GND
- 4x pairs of corner pads for ESC Signal/GND connections (DSHOT compatible)
- 1x pair I2C1 pads
- 1x Side-press button for BOOT(DFU) mode
- 36x46mm PCB with 30.5mm mounting holes
- 10g
|